Calibrating & Launching - sky viper m200 Nano Drone Instruction Manual

CALIBRATING & LAUNCHING
1
Turn OFF Remote Control.
2
Move the switch on the rear of the Drone to the
OFF position.
3
Now move the same switch on the Drone to the
ON position.
4
Quickly place the Drone on a
FLAT LEVEL SURFACE.
5
Turn Remote Control ON (Middle position).
6
Slowly push remote control THROTTLE STICK
UP until Drone lifts into the air.
IMPORTANT: YOU ONLY HAVE A FEW
SECONDS AFTER THE DRONE IS
SWITCHED ON TO PLACE THE DRONE ON
A LEVEL SURFACE FOR PROPER CALIBRA-
TION. IF DRONE DOES NOT RISE TO A
STABLE HOVER OR FLIES ERRATICALLY,
REPEAT STEPS 1 THROUGH 6.
CAUTION: NEVER APPROACH DRONE
WHILE THE PROPELLER BLADES ARE
STILL SPINNING. THROTTLE DOWN UNTIL
THE BLADES STOP THEN TURN OFF
REMOTE BEFORE ATTEMPTING TO
HANDLE DRONE.
1
OFF
OFF
2
OFF
3
4
5
6
ON
ON
4