Flight Sensitivity Adjustment; Calibrating & Launching - sky viper V950STR Instruction Manual

FLIGHT SENSITIVITY ADJUSTMENT

Drone responsiveness may be adjusted on the
Controller to match your flying skills.
There are three choices:
1. BEGINNER – 2. INTERMEDIATE – 3. ADVANCED
It is best to start in BEGINNER MODE 1 until you
have mastered flying. Flight sensitivity can be adjusted
before or during flight.
IMPORTANT: Advanced Mode 3 is a
performance flight setting for OUTDOOR USE
ONLY. Blade guards and camera module
MUST BE REMOVED for proper flight opera-
tion in Mode 3.
CALIBRATING & LAUNCHING
1
Turn OFF Remote Control.
2
Disconnect the LiPo battery connectors hanging
out from the back of the drone.
Pull connectors, not wires.
3
Reconnect battery connectors.
4
Quickly place Drone on FLAT LEVEL
SURFACE.
5
Turn Remote Control ON.
6
Slowly push remote control THROTTLE
STICK UP until Drone lifts into the air.
IMPORTANT: YOU ONLY HAVE A FEW
SECONDS AFTER THE LIPO BATTERY IS
PLUGGED IN TO PLACE DRONE ON A
LEVEL SURFACE FOR PROPER CALIBRA-
TION. IF DRONE DOES NOT RISE TO A
STABLE HOVER OR FLIES ERRATICALLY,
REPEAT STEPS 1 THROUGH 6.
CAUTION: NEVER APPROACH DRONE
WHILE THE PROPELLER BLADES ARE
STILL SPINNING. THROTTLE DOWN UNTIL
THE BLADES STOP THEN TURN OFF
REMOTE BEFORE ATTEMPTING TO
HANDLE DRONE.
1 - BEGINNER
2 - INTERMEDIATE
3 - ADVANCED
1
2
4
6
4