Troubleshooting - sky viper V950STR Instruction Manual

TROUBLESHOOTING

PROBLEM
Drone is unresponsive or
behaving erratically
All blades spin, but Drone
will not fly properly
Drone drifts in any
direction during flight
without direction from the
remote
Drone crashes
immediately
Drone crashes when
attempting stunt functions
Stunt button does not
work
Drone flight is erratic when
Flight Sensitivity is set to 3
www.skyrockettoys.com/products/sky-viper
Customer Service :
888-674-5650
Sky Viper is a registered tradmark and the Skyrocket logo are trademarks of Skyrocket Toys LLC.
Drone may be miscalibrated by launching from an unlevel
surface. Turn the remote off and unplug Drone's battery for
30 seconds then turn them back on and try again from a
flat, level launching surface.
Ensure your remote is within unobstructed view of Drone and
you are within 30 feet range.
Ensure the remote has fresh batteries and the LiPo battery
is fully charged.
Inspect Drone for any possible damage. Turn the remote off
and unplug Drone's battery for 30 seconds then turn them
back on and try again from a flat, level launching surface.
Drone's blades may have been installed incorrectly. Reinstall
and remember that the Green blades point forward.
Adjust the trim controls until drifting ceases, see page 7.
Propellers may be installed in the wrong position. Ensure
proper installation.
Ensure that Drone is flying a minimum distance of 9 feet
from the ground with a minimum 9 feet clearance in all
directions.
Be sure to detatch the camera unit from the Drone.
Ensure blade guards and camera module are removed to
reduce performance inhibiting weight.
©2015 Skyrocket Toys LLC, Los Angeles, CA 90066 USA. All Rights Reserved.
SOLUTION
™
MADE IN CHINA.
#skyviper #skyviper