Control Software Installation - KeyWest Technology Media Pod Operation Manual

Media POD
Keywest Technology Information Systems
To control the Media POD remotely through its GUI, follow the directions below and install the
Media POD software on a computer of your choice (with the following minimum requirements):
--Pentium III, AMD or Celeron CPU greater than 200 MHz
--64 MB Ram
--100 MB HDD Space
--Network connection capable of reaching the Media POD (see IT if necessary)

Control Software Installation

Insert the CD that came with your Media POD, or your demo CD into your PC (this is your
"creation" station, where you will be able to create and schedule your display—DO NOT
INSTALL THIS SOFTWARE DIRECTLY ON YOUR MEDIA POD). A splash screen should
appear with a button to setup the application—click Install and you should see a setup similar to
the screen below (note the version number and name may vary).
Figure 2
Keywest Technology
7
th
14563 W. 96 Terrace
Lenexa, Kansas 66215
KWT TM 2-1-MEDIAPOD
800.331.2019
24 July 2006
www.keywesttechnology.com
Change 01