Media POD
Keywest Technology Information Systems
Next, right-click on the Network adapter, and select properties again:
On the network properties page, scroll down to TCP/IP, highlight that, and then left-click on the
PROPERTIES button:
There's a decision to make at the next step (if it hasn't
already been made) and that is to either run the player with a
dynamic or static IP. The best selection for the operator is a
static IP address...this is an address that doesn't change
unless someone changes it manually. Your IP department
will have to assign the Static IP address to you. The second
method is Dynamic—this method means the IP address will
change each time your system's router resets or possibly
every time the Media POD is power cycled. The danger in
this method is that you may not know from day to day the
Keywest Technology
13
th
14563 W. 96
Terrace
Lenexa, Kansas 66215
KWT TM 2-1-MEDIAPOD
800.331.2019
24 July 2006
www.keywesttechnology.com
Change 01
Need help?
Do you have a question about the Media Pod and is the answer not in the manual?