KeyWest Technology Media Pod Operation Manual page 17

Media POD
Keywest Technology Information Systems
After you have set all the player functions, it will be necessary to start it playing pages again.
Click the START button in the lower left corner of the desktop. Select SHUT DOWN then
select LOG OFF ADMINISTRATOR and click OK.
The LOG ON dialogue will appear. Enter USER NAME "mediaPOD" (no quotes, one word, no
spaces) and click OK. The Media POD ID screen will appear as your last valid schedule is
loaded into memory. The schedule will begin playing automatically.
After the IP address is set and the unit is back in playback mode, you can remove the keyboard,
monitor, and mouse if you desire. Unless you are going to control the unit in "on-line" mode
that is directly on the player itself you will not need those user interface devices.
This manual will now cover the creation & scheduling software...all functions apply to remote
software as well as the player itself—remember, the software is the same, it's only a matter of
where you create the schedules that determines if you are doing local control or remote control.
Keywest Technology
17
th
14563 W. 96 Terrace
Lenexa, Kansas 66215
KWT TM 2-1-MEDIAPOD
800.331.2019
24 July 2006
www.keywesttechnology.com
Change 01