Table of Contents
Advertisement
6.2
Introduction to Scubapro
LogTRAK
LogTRAK is the software that allows the
M2 to communicate with a Windows-
based PC or Mac OS.
In order to take advantage of any of
these features, you need to establish a
communication between your PC and M2
with a cradle.
To start the communication
1. Connect the cradle to your PC
2. Launch LogTRAK on your PC
3. Select the serial port where the cradle is
connected
Extras -> Options -> download
Select the COM port that is used for M2
cradle.
4. Place the M2 on the cradle.
Download dive profiles
From LogTRAK, by selecting Dive ->
Download Dives you can transfer the M2
Logbook to your PC or Mac.
There are three main views each showing a
specific part of your dive logs:
Profile shows the graphical data of the dive.
Details provides details about the dive, where
you can edit, for example, the equipment and
tank information.
Location, shows your dive site on the
world map.
The selection tabs for views are on the left
side of the main window.
M2 USER MANUAL
6.3
Change warning
settings of the M2 and
reading the computer
information
By selecting Extras -> Read Dive Computer
settings you can enable/disable warnings
that cannot be enabled or disabled by
using the menus on the M2 unit.
59
Advertisement
Table of Contents
