Setting The Heart Rate Low Limit ("Lo Pulse"); Setting The Ascent Speed Alarm ("Speed"); User Settings ("User"); Workload ("Wrkload") - Uwatec M2 User Manual

4.4.7 Setting the heart rate low limit
("Lo PULSE")
By pressing SEL in this menu the heart
rate low limit function starts blinking and by
pressing +/UP or -/DOWN you may select
between enabling or disabling the alarm
with the on/off setting. After confirming
your selection by pressing the SEL button,
the HR low value starts blinking. By
pressing the +/UP or -/DOWN buttons you
may select the value from 25 to 100bpm.
By pressing the SEL button the selection
will be confirmed.
4.4.8 Setting the ascent speed alarm
("SPEED")
By pressing SEL in this menu the function
starts blinking, and by pressing +/UP or -/
DOWN you may select between enabling or
disabling the alarm with the on/off setting.
After confirming your selection by pressing
the SEL button, the ascent speed starts
blinking. By pressing the +/UP or -/DOWN
buttons you may select the value from 0.1 to
5.0 meters/second (1..15 feet/second). By
pressing the SEL button the selection will be
confirmed.
36
4.5

User settings ("USER")

User related selections are grouped in this menu.
By pressing the SEL button the following
menus can be accessed.
DOWN
USER SET
UP
4.5.1

Workload ("WRKLOAD")

By pressing the SEL button in this menu the
workload input starts blinking, and by pressing
+/UP or -/DOWN you may select between
SEL
WORKLOAD
DOWN
UP
HR LIMITS
DOWN
UP
UNITS
DOWN
UP
BACKLIGHT
DURATION
DOWN
UP
DESATURATION
RESET
M2 USER MANUAL