Accessing the Internet
After a client device is successfully connected to your
device, you can access the Internet in Automatic or
Manual mode. The default mode is Automatic.
Mode
Automatic
Manual
NOTE:
To modify the parameters of your device, log in to the Mo-
bile Hotspot configuration page.
Your device is automatically connected to
the Internet, and you can surf on the Internet
through the client.
1. Log in to the Mobile Hotspot
configuration page.
2. Select Settings > Network Settings >
Dial-up Settings > WAN Connection
Mode > Manual, and then click Apply.
3. Select Home, and click Connect or
Disconnect.
Operation
14