Status Light Indicators - Panasonic KX-TGP600 Quick Setup Manual

Hide thumbs Also See for KX-TGP600:
Table of Contents

Advertisement

PRIMUS BUSINESS SERVICES
GUIDE

Status Light Indicators

STATUS Indicator
Solid Green
Slow Flashing Green
(once a second)
Quick Flashing Green
(4 times a second)
Solid Red
Slow Flashing Red
(once a second)
Quick Flashing Red
(4 times a second)
Solid Yellow
Slow Flashing Yellow
(once a second)
Quick Flashing Yellow
(once a second)
Slow switching (Red
→ Green → Amber →
Off)
Quick switching (Red
→ Green → Amber →
Off)
|
|
HOSTED PBX
PANASONIC TGP600 TPA60 TPA65 QUICK SETUP
The base unit is connected to the internet and connected
to the HPBX Small Office system.
The base unit is being used for a call.
or
The base unit is downloading data. Do not disconnect the
Ethernet cable or AC power adaptor from the base unit
until the light becomes solid green.
The handset/desk phone is busy.
The base unit is booting up. This will take about 40
seconds.
The base unit is registering a handset/desk phone.
The base unit is paging handsets/desk phones (by using
the handset locator button).
The base unit's IP address may conflict with another IP
address on your network.
The base unit is attempting to connect to the Internet or to
the HPBX Small Office system. Please wait.
If it flashes indefinitely, check your network settings,
ensure your Internet connection is working, or try
restarting all your devices.
Unplug the base unit's AC adaptor to reset the unit, then
reconnect the AC adaptor.
If it is still flashing, there may be a problem with the base
unit hardware.
The base unit is in maintenance mode. Once it is off, turn
the base unit back on again.
The base unit is restarting. Please wait.
PRIMUSBUSINESS.CA
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tpa60Kx-tpa65Tgp600Tpa60Tpa65

Table of Contents