Polycom realpresence group 300 Quick Tips page 2

Place a Multipoint Call
• Place a call, then press on the remote
control or select , and then select Add a Call
to place a call to the next site. Repeat until all
sites are connected.
• Call a group from the Contacts.
• Call one or more sites, and then ask those sites
to call additional sites.
Adjust the Volume
Press or on the remote control.
Add to the Favorites List
• In the local interface, go to Place a Call >
Contacts. Select Search and use the onscreen
keyboard to find the desired entry. Highlight the
entry and select Favorite.
• In the web interface, go to the Manage Favorites
page. Click Add from Directory, and then search
for the person to add and select Save.
• You can also create a Favorite in the web
interface. On the Manage Favorites page, click
Create New Favorite, and then complete the
fields and click Save.
Select or Adjust a Camera
• While in a call, select > Cameras and either
Your Cameras or Their Cameras. The menu
disappears and a message displays, telling you
which camera you are controlling.
• To switch between Your Cameras and Their
Cameras without accessing the menu while in a
call: on the remote control, press Select.
• To pan or tilt the selected camera: on the remote
control, press the left, right, up, and down
navigation buttons.
• To control cameras without accessing the menu,
press or on the remote control.
Power the System On and Off
• For RealPresence Group 300, 500, and 700
systems:
» To power on the system, press
the remote control or the power sensor
on the front of the system.
» To power off the system, press and
hold on the remote control or the
power sensor on the front of the system
for 3 seconds. Wait 15 seconds before
you unplug the power cord.
• For RealPresence Group 550 systems:
» Power the system on or off with the
power switch on the back panel.
Tips and Tricks
• Make sure you know the name or number of the
site you want to call.
• Connect and test any additional equipment
before the meeting.
• Avoid wearing bright colors, all-light or all-dark
clothing, or "busy" patterns. Light pastels and
muted colors look the best on the screen.
• Adjust your camera so that the far site can see
you. Fill the screen with people rather than with
the table, chairs, walls, lights, or floor.
• Adjust your microphone so that the far site can
hear you. Mute the microphone before moving
it.
• Make sure that you can see and hear the far-site
participants.
on
Quick Tips
for
®
Polycom RealPresence
Group Series
www.polycom.com | 3725-69844-001/A
Copyright © 2014 Polycom, Inc. Polycom® and the names and
marks associated with Polycom's products are trademarks and/or
service marks of Polycom, Inc., and are registered and/or com-
mon-law marks in the United States and various other countries.
®
| February 2014