Table of Contents
Advertisement
ANSWERING SYSTEM OPERATION
Remote Access Commands
Function:
Play messages in
a mailbox
Repeat a message
Skip a message
Stop
Save messages
Delete message
Review announcement
Record announcement
Record memo
End remote access call
Turn system off
Turn system on
NOTE: The remote access call will automatically end if 20 seconds go by
with no key being pressed (other than when recording or playing
messages or announcements).
AT TOUCH TONE PHONE
Command:
Press #, then the appropriate mailbox
number (1, 2, or 3). The system plays
new messages. If there are no new
messages, the system plays old messages.
Press # 4 while message is playing;
each press backs up another message.
Press # 6 while message is playing;
each press advances another message.
Press # 5.
Hang up.
Press # 9 while message is playing.
Press # 7; system plays announcement,
then beeps.
Press * 7; after beep, record
announcement, press # 5 to stop.
System plays back announcement.
Press * 8; then mailbox number where
you want memo recorded; speak after
beep; press # 5 to exit.
Press * 0.
Press # 0; the system announces,
"The machine is off. " Press # 0 again
to turn the system back on.
When system is off, it answers after 10
rings and announces, "Please enter your
security code. " Press #, then enter your
remote access code.
29
Advertisement
Table of Contents
