Operation - AT&T 1854 Owner's Manual

T E L E P H O N E
MAKING/ANSWERING CALLS
1 Lift the handset or press s.
2 To end a call, hang up or press s.
3 To switch from handset to speakerphone,
press s then hang up. To switch
from speakerphone to handset, lift the
handset.
RINGER VOLUME
Set the switch to LO, HI or OFF. Other
phones are not affected by this ringer set-
ting.
HANDSET/SPEAKERPHONE VOLUME
During a call, press [ to increase
volume; press ] to decrease volume.
REDIAL
1 Lift the handset or press s.
2 Press a to dial the last number
called from this phone.
AUTO REDIAL
1 When you hear a busy signal, hang up
and press a. The phone will
continue redialing the number every
40 seconds up to 10 times.
2 When you hear the far end ringing, pick
up the handset or press s.
3 To cancel Auto Redial at any time, press
a, lift the handset, or press
s.
Access telephone
company subscriber
services.
Mute the microphone.
Put a call on hold.
HOLD
1 To put a call on Hold, press H.
2 To take a call off hold, press H, or
press s, or lift the handset of this
phone or an extension.
MUTE
1 Press M. The far-end party will not
be able to hear anything from your end,
but you will be able to hear the other
party.
2 To return to 2-way conversation, press
M again. Mute is also canceled when
you switch from handset to speaker-
phone or speakerphone to handset.
Temporary Tone
O P E R A T I O N
Press / when you would normally
press the switchhook to activate special
subscriber services such as Call Waiting
or 3-Way Calling.
If you have rotary telephone service, use
this feature to send tone signals required
by some tone activated services (such as
telephone banking).
1 Lift the handset or press s, and dial
the number.
2 Press *. All buttons pressed after
this will send tone signals.
3 When you hang up, the phone returns to
rotary dialing.
Microphone
FLASH
TEMPORARY TONE DIALING
Redial last
number called.
Adjust speaker
volume.
Speakerphone.