AT&T 1854 Owner's Manual page 5

T E L E P H O N E
You can store up to 16 telephone numbers,
each up to 24 digits long, in the 8 one-touch
and 8 two-touch dialing locations. Remove
the plastic cover to fill in the directory card
after you store numbers in memory.
NOTE: You may choose to store
emergency telephone numbers in memory
locations. This feature is provided only as
a convenience and the manufacturer
assumes no responsibility for customer
reliance upon the memory feature.
Although testing the programming of
emergency numbers is not recommended,
if you do make a call to an emergency
number:
• You must remain on the line and briefly
explain the reason for the call before
hanging up.
• Programming/testing of emergency
numbers should be performed in the
early morning or late evening (off-peak
hours).
1 Press p.
2 Enter the telephone number. To insert a
hyphen between digits, press S
once. To enter a 3-second pause, press
S twice. You can also store *, #,
and /.
3 Press a memory button to store a
number for one-touch dialing
— OR —
Press L and a memory button for
two-touch dialing.
You will hear 2 beeps and see the
display flash when the number is stored.
If you hear a long sequence of beeps and
see Es on the screen, the number has not
been stored. Repeat Steps 1-3.
Dialing a Memory Number
1 Lift the handset or press s.
2 Press a memory button to dial a one-
touch memory number
— OR —
Press L and a memory button to
press a two-touch memory number.
Memory locations.
Store numbers in
telephone memory.
M E M O R Y
STORING NUMBERS
STORING LONG NUMBERS
You can store a number longer than 24
digits by dividing the number in half and
storing it in two locations
— OR —
Store part of the number in a memory
location and dial the rest manually.
VIEWING NUMBERS IN MEMORY
When the phone is not in use, press the
memory button (or press L and the
memory button) of the location where the
number is stored.
ERASING MEMORY NUMBERS
1 Press p.
2 Press the memory button (or press L
and the memory button, of the location
you want to erase).
STORING NUMBERS JUST DIALED
1 Press p.
2 Press a.
3 Press the memory button (or press L
and the memory button) of the location
where you want to store the number.
Press before memory button
to access numbers stored in
"gray" locations.