Remote Operation - AT&T 1739 User Manual

Remote operation

Access the answering system remotely
You can access many features remotely from a touch-tone telephone.
1. Dial your telephone number.
2. When the system answers, enter your 3-digit remote access code during
or after the announcement. The system announces the number of messages,
then begins playing back the messages. If the announcement continues
to play after you have entered your remote access code, wait for the
announcement to end, then enter the code again.
To use remote access commands (see below), press 5 during message
3.
playback and wait for the two-beep signal.
4. Enter a remote access command.
Feature summary
FUNCTION:
Voice help menu
Play all messages
Play new messages
Repeat a message
Stop new playback
Skip a message
Save message
Delete message
Delete all messages
Record announcement
Review announcement
Record memo
Review the clock
Set the clock
Turn system off
Turn system on
Review settings
COMMAND:
Press 5.
After the 2 beeps, wait 4 seconds for the system to
automatically play back all messages, or press 1.
Press 2.
Press 4 while the message is playing.
Press 5 while the message is playing.
Press 6 while the message is playing.
Hang up.
Press 3 while the message is playing.
After listening to all messages and the system has
beeped twice, press 3 twice.
Press 7, after the beep. Record the announcement,
and press 5 to stop. The system will then play back
the announcement.
Press 7.
Press #, and speak after the beep. Press 5 to exit.
Press 8.
Press 8. Follow the prompts to set the day, time
and year.
Press 0.
When the system is off, it answers after 10 rings,
and announces "The machine is off." The system
beeps twice. You can leave a message by pressing
#, hang up to exit, or turn the system on as follows:
• Press 0. The system announces "The machine
is on, XX minutes to record," then beeps twice.
The system is now turned on.
Press 9.
�