Dle Dc4 Fn M T (Specification Of Fn = 1) - Citizen CT-S280 Command Reference Manual

DLE DC4 fn m t (Specification of fn = 1)

Support model
[Function]
Outputting specified pulse in real-time
[Code] <10>H<14>H<fn><m><t>
[Range]
fn=1,
m=0, 1
1 ≤ t ≤ 8
[Outline] [The specification which is common to the model]
• A signal specified with "t" is output to the connector pin specified with "m".
m
0
1
• Set the ON time/OFF time to t x100 ms, respectively.
[Caution] [The specification which is common to the model]
• When receiving a code row coinciding with the code configuring this command, the
same operation as this command takes place and attention by the user is required.
Example: When corresponding code row is present in bit image data.
• This command must not be used between other command code rows.
Example: This command is used in the bit image data.
• This command is ignored under the following conditions.
• During sending block data
• During output of signal to drawer kick connector
• During occurrence of error
[See Also] ESC p
CT-S280 CT-S300
CT-S281 CT-S310
Connector Pin
Pin No. 2 of drawer kick-out connector
Pin No. 5 of drawer kick-out connector
- 318 -
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
CT-S251
CT-P29x series CT-S310 II