Select the Date and Time icon in the Standard CMOS setup. The
current values for each category are displayed. Enter new values
through the keyboard or hit the "+" or "-" key to change values.
Select the appropriate specifications to configure the type of
floppy drive that is attached to the system: 360 KB 5¼", 1.2 MB
5¼", 720 KB 3½", and/or 1.44 MB 3½". The settings have not
been pre-installed.
Select the appropriate values to configure the hard disk type you
are using for the master and the slave. Available types are 1~46,
USER, AUTO, Not Installed, and CDROM. The settings have not
been preinstalled.
Enabling this option allows the system to issue a warning when
any program (or virus) issues a disk format command or attempts
to write to the boot sector of the hard disk drive. Further confir-
mation is required before accessing this particular section of the
hard disk drive.
Chapter 3 AMIBIOS Setup 35