Contents 1 Important 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 3 Get started Power supply Turn on/off Adjust volume 4 Use Bluetooth devices Connect a device Play from Bluetooth device Control your phone call Disconnect a device Reconnect a device 5 Listen to an external device...
1 Important Warning • Never remove the casing of this speaker. • Never place this speaker on other electrical equipment. • Keep this speaker away from direct sunlight, naked flames or heat. • Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the speaker from the power.
2 Your Bluetooth speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction This speaker has passed splash-proof test (IPX4) and can be used near water. With this speaker, you can enjoy audio from Bluetooth-enabled devices or other external devices.
Overview of the speaker PAIRING • Enter Bluetooth pairing mode. • Disconnect Bluetooth connection. • Answer or reject an incoming call. • End the current phone call. • Transfer the call to your mobile device. b NFC • Connect a NFC compatible device through Bluetooth.
3 Get started Always follow the instructions in this chapter in sequence. Power supply Either AC power or battery can be used as power supply of this product. Option 1: Battery power The speaker can operate on the built-in rechargeable battery. LED indicator Battery status Note...
• Connect the adapter to: Note • socket on the speaker. • the power outlet. • If the battery level is low, the red LED indicator flashes. Turn on/off Switch to standby mode • The speaker switches to standby mode in the following situations: • The connection with Bluetooth device or other device is invalid for 15 minutes;...
4 Use Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth. Tap the NFC tag on the top of the speaker with the NFC area of your Bluetooth Connect a device device.
Select [Philips BT6000] displayed on your Disconnect a device device for pairing. If necessary, input “0000” as the pairing password. Press and hold PAIRING for three seconds • » After successful connection, the when there is no incoming call; speaker beeps twice, and the LED •...
5 Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player. Note • Make sure that music playback through Bluetooth is stopped. Open the protective cover on the left of the speaker.
6 Product General information information Power Supply - AC Power Brand name: PHILIPS; (power adapter) Model: AKN2G-0500200VU; Note Input: 100-240 V~, 50/60 Hz, 0.35 A; • Product information is subject to change without prior notice. Output: 5 V 2 A;...
To keep the warranty valid, never try to repair Fail to find [Philips BT6000] on your device the system yourself. for pairing. If you encounter problems when using this •...
8 Notice Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), Any changes or modifications made to this polystyrene foam (buffer) and polyethylene device that are not expressly approved by (bags, protective foam sheet.) Gibson Innovations may void the user’s Your system consists of materials which can authority to operate the equipment.
Page 16
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.