Option 3: Connect audio through analog
audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
connectors on your SoundBar to the AUDIO
OUT connectors on the TV or other device.
DVD
4
Spatial calibration
Spatial calibration is used to achieve the following
convenience, and simultaneously optimizes surround
sound experience for it.
•
Have freedom to place the portable left and
right speakers (surround) according to your
need.
•
Automatically balance the portable speakers
(surround) with respect to your seating position.
The spatial calibration involves two steps.
•
Step 1: calibrate the listening zone
•
Step 2: calibrate the surround speaker position
When to calibrate
•
If you perform spatial calibration for the first
time, perform Step 1 and Step 2 in sequence.
•
If you re-design your seating layout, perform
Step 1 and Step 2 in sequence.
•
If you re-locate the portable left and
right speakers (surround), perform Step
2 independently (Step 1 can be skipped).
Before you start
•
Make sure that the room is fairly quiet.
•
Place the portable left and right speakers angled
towards the main unit.
•
Make sure that the main unit, the portable left
and right speakers can fully "see" each other,
no obstacle between them blocking such view.
Stand the portable speakers upright if needed.
•
The minimum distance between the portable
speakers and the main unit is 0.8m (2.6'), the
maximum distance 6m (20').