Wireless Portable Speakers; Wireless Subwoofer - Philips Fidelio B5 User Manual

Wireless portable speakers

The SoundBar comes with two wireless portable
speakers (left and right).
a b
* The illustration above is for overview of the
portable left speaker.
a Reset key
Press with a pin to reset the portable speaker to
the default settings.
b ON
•
Press to turn on the portable speaker if it
automatically goes to standby.
•
Press and hold to switch the portable
speaker to standby.
c Speaker LED
•
Blinks in red and orange alternatively
if the portable speaker is not wirelessly
connected to the main unit.
•
Lights up white when the portable speaker
is wirelessly connected to the main unit, or
when the battery capacity is full or more
than 30% remaining.
•
Lights up red when the battery capacity is
less than 30% remaining .
•
Blinks red when the battery capacity is less
than 10% remaining.
•
Lights up orange when the portable
speaker is being charged (only for the
portable speakers docked into the main
unit).
d SURROUND ON DEMAND button/LED
•
Press to switch the portable speaker to
SURROUND ON DEMAND mode.
•
The LED lights up white when the portable
speaker is switched to SURROUND ON
DEMAND mode.
button/LED
e
•
Press to switch the portable speaker to
Bluetooth mode.
•
The LED blinks when you switch the
portable speaker to Bluetooth and no
Bluetooth devices are connected.
c d e
•

Wireless subwoofer

The SoundBar comes with a wireless subwoofer.
a CONNECT (connect)
b Subwoofer indicator
c AC MAINS~
•
The LED lights up when you switch
the portable speaker to Bluetooth and
Bluetooth devices are connected.
Note
If you press the button on the portable speaker,
the portable speaker disconnects the main unit (or
SURROUND ON DEMAND mode switches off).
Press to to enter the pairing mode for the
subwoofer.
•
When the power is turned on, the indicator
lights up.
•
During wireless pairing between the
subwoofer and the main unit, the indicator
blinks white quickly.
•
When the pairing succeeds, the indicator
lights up white.
•
When the pairing fails, the indicator blinks
white slowly.
Connect to the power supply.
EN 5