Reebok i-Trainer.S User Manual page 7

Assembly
Reebok i-Trainer.S
Resistance Knob
continued
19. Now mount the resistance knob inner to the resistance knob housing (224).
The cut out notches at the back of the resistance knob must be vertical.
If they are not, turn the resistance knob until they are vertical.
20. Now place resistance knob inner into resistance knob housing and secure
using 1 x 802 screw.
21. Insert resistance knob housing into upright and secure using 2 x 802 screws.
You will require:
224 x 1 802 x 3
802
802
RFE 4489_RE014200_iTrainerS_UMFINAL.indd 10-11
Customer Support 0800 440 2459
1
224
802
10
Reebok i-Trainer.S
Upper Handlebars and Covers
22. Push the tops of the upper handlebars (213 & 260) into the handlebar tubes (fig.1).
23. Fix these using 4 x 290 bolts and 4 x 814 curve washers into each handlebar.
24. Once both handlebars are secure, place the handlebar covers (205 & 237)
over the joint, and fix using 2 x 802 screws into each handlebar.
You will require:
6mm
213 x 1
260 x 1
1
814 x 8 290 x 8 802 x 4 205 x 2
260
814
205
802
11
reebokfitness.info
237 x 2
213
237
802
290
25/06/2010 15:32