Maintenance - Bodum Bistro 10903 Instructions For Use Manual

Hide thumbs Also See for Bistro 10903:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
GRiNdER
The BODUM
coffee grinder uses conical burr grinder, which
®
are the best grinders you can get. The burr spins slower than
the wheel model, which makes them quieter and less messy.
You can use a conical burr grinder for oily or flavoured cof-
fees and it is not likly to clog, like the other kinds of grind-
ers. These are the best.
sToNE sAfETy CUT-oUT fEATURE
Given the huge quantities of coffee that are packed every
day, very small stones may accidentally find their way into
even the finest coffee beans. The appliance is equipped
with a stone safety cut-out - or «friction clutch» - in order
to prevent damage to the grinding gear. A stone in the
grinding gear will cause a loud rattling noise. Switch the
appliance off immediately, remove plug from wall outlet,
open it as described in the section entitled «Maintenance»
and remove the stone.

MAiNTENANCE

CLEANING THE GRINDING GEAR.
Disconnect the mains plug from the socket outlet. Remove
any remaining beans in the bean container (fig.18) and take
the latter off by twisting it in an anticlock-wise direction as
far as the release area stop (fig.19). Lift the bean hopper
from the housing (fig.20). The grinding ring can then be
lifted out of the machine.
A soft-bristle brush is ideal for cleaning the grinding gear.
Reassemble the machine by performing the above opera-
tion in reverse order. The housing, lid (1), coffee bean
container (2) and grinding mechanism cover (5) are easy to
clean using a damp cloth. The ground coffee container (6)
and its lid (7) are dishwasher-proof.
Any other servicing should be performed by an authorized
service representative.
polARizATioN
For US Customers only
This appliance has a polarized plug (one blade is wider
than the other).
To reduce the risk of electric shock, this plug will fit in appo-
larized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents