Preparation Before Use - Brookstone Recover 3D Manual

Preparation Before Use

Caution
• It is recommended that a carpet be
placed under the Brookstone
Recover 3D Massage Chair to
TM
prevent scratching the floor and to
reduce noise level during operation.
• As the Brookstone Recover
Massage Chair is heavy, please
exercise extra care not to damage
the floor when positioning it.
• Maintain a minimum distance of 3
feet from AV devices, such as a TV
or radio, to prevent signal
interference.
• Use the Brookstone Recover
Massage Chair only when it is
placed on an even, flat surface.
13
Caution
3D
TM
3D
TM
Power On/Off
• Connect the appropriate end of the
power cord to the power outlet on
the back of the chair. Then plug the
other end of the power cord into a
standard 110V electrical outlet.
• Turn on/off the main power switch,
located at the back of the Brookstone
Recover 3D Massage Chair to power
TM
the chair on/off.
• Ensure the power cord is not placed
under the Brookstone Recover
Massage Chair.
• Ensure all switches are turned "OFF"
(including the main power switch)
before connecting the power plug to
an electrical outlet.
• Always check to ensure that there are
no holes or tears on the backrest pad.
Stop using the Brookstone Recover
3D Massage Chair immediately if you
find even the slightest tear. Unplug the
Brookstone Recover
Chair and contact Brookstone
Customer Service at 866-336-3199.
Caution
3D
TM
Caution
3D Massage
TM
TM