CAUTION • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
This massager is intended for household use only. SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed. Read all instructions before using this massager. DANGER – To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
Page 6
Use this massager only for its intended use as described in this manual. Do not use attachments not recommended by Brookstone. Never operate this massager if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
Page 7
10. Do not use outdoors. 11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 12. To disconnect, turn all controls to the off position, then remove the plug from the outlet. 13. Use heated surfaces carefully. May cause serious burns. Do not use over insensitive skin areas or in the presence of poor circulation.
Page 8
22. Any individual who may be pregnant, or recently gave birth, has a heart condition, or a pacemaker, suffers from diabetes or other sensory impairment, phlebitis and/or thrombosis, joint dysfunction, inflammation or injuries, weak bones, osteoporosis, a high fever, an abnormal or curved spine, is at an increased risk of developing blood clots, has pins/screws/artificial joints or other medical devices implanted in his/her body, is being treated for a medical condition or physical injury or is under a doctor’s care should consult with a...
Page 9
to disassemble or repair the massager yourself. 34. Do not operate for more than 20 continuous minutes. Turn off the massager and allow it to rest (cool) for 45 minutes before re-using. This will prolong the life of the massager. 35.
Page 10
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
LOCATION OF PARTS AND CONTROLS 1. Massage Nodes (on back) 5. Weighted Arms 6. Power Cord 2. Control Panel 7. Node Adjustment Knob 3. Positioning Handles 4. Snaps...
USING THE MASSAGER 1. Plug the POWER CORD into an outlet. 2. Grip the WEIGHTED ARMS and drape the massager around your neck with the MASSAGE NODES in the center of your back. 3. Press the POWER button to begin massage at its lowest level. 4.
Page 13
10. For heat only, press the HEAT button to activate the heat, then press and hold the L or H button to turn off the massage nodes. 11. Press the POWER button to turn all functions off. NOTES: • The massage function will automatically shut off after 8 minutes. •...
CARE AND MAINTENANCE 1. Keep the Tapping Neck & Shoulder Massager with Heat clean and away from places of high humidity. 2. Always unplug this massager from the electrical outlet immediately after use and before cleaning. 3. Wipe dust and dirt off with a dry, soft cloth after use. Do not submerge in any liquid. 4.
TROUBLESHOOTING Note: This massager is equipped with a thermal safety shut-off. Should the massager stop working or fail to power on after extended use, allow the massager 45 minutes to reset. The massager will then resume normal function. Problem Possible Cause/ Action Motor sound during 1.
(“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product.
Page 17
Brookstone, in so far as permitted by law, provides these products “as is. ” This warranty does not apply to: a) damage caused by failure to follow instructions relating to product’s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes;...