Document Table - Sharp AR-C150 Service Manual

7) Install the electrode section to the original position, and fix it with
the fixing screw.
8) Insert the main charger unit fully into the machine along the copier
guide.
B. Document table
(1) Document table cleaning
If the document table is dirty, the dirt is copied.
Wipe and clean with soft cloth with water, then wipe with dry cloth.
(2) Document cover cleaning
If the document cover is dirty, the copy is dirtied or the document size
is erroneously detected.
Wipe and clean with soft cloth with water, then wipe with dry cloth.
•
(Note) If the dirt cannot be removed easily, wipe with soft cloth im-
mersed in water or neutral detergent, then wipe with dry
cloth.
•
Do not use benzene or thinner for cleaning, which may
change the parts in quality or discolor.
6. Consumable parts setup
A. Fusing oil setup
1) Remove the cap (1) from the oil bottle (2), and remove the inner
cap. Set the cap (3) again.
1
2
2) Remove the oil tank cover (1) from the oil tank, and fill oil from the
oil tank (2).
1
2
(Note) Do not exceed line A when filling oil.
(Fusing oil handling)
(1) Print operation check procedure without filling oil in
the oil tank
1) Remove the fusing oil applying section cover.
2) Supply 10 – 15cc of fusing oil all over the oil pipe and the oil
blade. Use of fusing oil YYOK-0059FC31 (15cc) is advisable.
This allows to print about 100 pages.
4 – 8
AR-C150
1
3
2