Engine Prestart Checks - Miller Electric Metro 250D Owner's Manual

4.2 Connecting Battery and Installing Exhaust Pipe
Y Stop engine.
.
Installation of exhaust pipe is
optional.
4.3

Engine Prestart Checks

Check all fluids daily. Unit must be
cold and on a level surface. Oil may
be added at either oil fill.
Engine stops if oil pressure is low.
Y Heavy loading during first 50
hours will damage engine.
Keep load less than 225A
(weld) or 7 kVA (power) for
first 50 hours.
1 Exhaust Pipe
If unburned fuel and oil collect in ex-
haust pipe during run-in, see Sec-
tion 9.
18
Full
Diesel
Full
ST-801 079-A / Ref. ST-175 918-C
Tools Needed:
7/16, 1/2 in
Y Connect negative (−)
cable last.
−
+
Ref. ST-159 219-D
OM-402
1