Cub Cadet RT-75 Operator's Manual page 11

Rear Tine Shield
The rear tine shield protects the operator from flying debris
while also smoothing out freshly tilled soil.
Side Shield
The side shields are located on the right and left sides of the
tine shield and can be used with the depth adjustment lever
to control tilling depth. See the Operation section for more
information on using the side shields.
Tines
The tines are a series of hoes arranged on a revolving power-driven
shaft.
Neutral Lever
The neutral lever allows the wheels to be positioned in either a
drive or a neutral/freewheel mode. See the Operation section for
more information on using the neutral lever.
Handle Pivot Control Knob
The handle pivot control knob is located on the upper handle
and in the center of the handle. The knob is used to pivot the
handle to one of three positions. See the Operation section for
more information on using the handle pivot control knob.
Tine Shield Wash Nozzle
The tine shield wash nozzle is located on top of the tine shield.
The nozzle can be attached to a hose and used to clean dirt and
debris out of the tines and the inside of the tine shield. See the
Maintenance & Adjustments section for more information on the
tine shield wash nozzle.
S 4 — c & F 11
ection ontrolS eatureS