Sirius Satellite Radio Dock & Play PowerConnect User Manual page 53

If you see this on the screen:
Invalid Channel
Firmware Updating
If this happens:
You do not receive all the SIRIUS
channels to which you subscribed
No audio when using the Aux In
Cable or Cassette Adapter
No audio when using
PowerConnect or FMDA
Audio sounds too soft
Try this:
• You have attempted to tune to a channel that
you have not subscribed to, or does not exist .
Select a channel to which you have subscribed .
• Your radio is being updated over the air with the
latest software . Wait until the update is done .
Try this:
• If you have not yet activated your service, refer
to the User Guide which accompanied your
radio .
• Call 1-888-539-7474 for further assistance .
• Check all cables between your radio and your
vehicle's stereo system for a firm and secure
connection .
• Ensure you have selected the proper input
source on your vehicle's stereo system .
• Check that your radio and your vehicle's FM
radio are tuned to the same FM channel .
• Raise the volume of your stereo system or
increase the audio level of your radio until the
volume improves . Refer to the User Guide which
accompanied your radio for instructions .
53