Vehicle Installation
Step 2: Install the Dash or Window Mount
Depending on your situation, you can either choose to use the Dash Mount or the
Window Mount .
Installing the Dash Mount:
CAUTION! The adhesive used on the Dash Mount may be difficult to remove . Do
not install this mount on leather surfaces (contact your automobile dealership if
you are unsure about your dash surface), and make sure the air temperature is at
least 60ûF (15ûC) during installation . If it's not at least 60ûF, turn on the heater in
your vehicle to bring the temperature up to 60ûF .
1
Locate a flat surface for the Dash Mount . Make sure there is ample
room for the PowerConnect Vehicle Dock and radio when installed .
2
Set the orientation of the Dash Mount before adhering it . Loosen the
knob and adjust the adhesive foot for the location you selected in
DASH MOUNT - Option 1 and DASH
MOUNT - Option 2 should be
oriented like the image above .
14
DASH MOUNT - Option 3 should
be oriented like the image above .