Table of Contents
Advertisement
Vehicle Installation
4
Power on your radio by pressing the Power button .
5
Set your vehicle's stereo system to play input from
the auxiliary input source .
6
Be sure the vehicle is outside and the antenna
has a clear view of the sky . Verify that you are
receiving the SIRIUS signal . Refer to the User
Guide which accompanied your radio, and display the Signal Indicator
screen . If the signal is good, and you are hearing the audio when tuned
to channel 184, the installation is
complete . Now sit back and enjoy
Satellite Radio .
7
The audio level output of the radio
can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle .
Refer to the User Guide which accompanied your radio for instructions .
If the signal reception is good, but there is no audio when tuned to channel 184,
be sure the vehicle's stereo system is set to the correct source, i .e ., auxiliary input
source (step 5) . Also be sure that the audio level is set high enough to be heard
(step 7) . Refer to "Troubleshooting" on page 52 for additional help .
40
S i g n a l
SAT -
TER -
jump
+
+
Advertisement
Table of Contents
