"Step 1: Choose a Location for Your
Radio" on page 12 .
3
Attach the Dash Mount to the
PowerConnect Vehicle Dock using
the provided screws .
4
Clean the surface with the alcohol
preparation pad and let it dry
thoroughly .
5
Peel off the adhesive liner . Position,
press, and hold the Dash Mount and
PowerConnect Vehicle Dock in place for
30 seconds .
IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for at least 24
hours before using the mount .
6
The dock mounting plate can be tilted in different directions .
Adjust as necessary for your particular vehicle . When the
Knob
Adhesive Foot
Dock Mounting
Plate
15