Sensor Operation Testing, Testing Zones; Setting Date And Time; Activated Users’ Review; System Compliance And Warranty - SECOLink MAS-800 Short User Manual

Intruder alarm system

Sensor operation testing, testing zones

It is recommended to do sensor work test at least one time per month. During a test it is necessary to make a
violation of zone, it means to open door or windows, which have magnetic contacts, or to simulate
movement near the motion sensor. Glass break detector can be tested by hard clapping hands. Testing:
ž F-key:
ž Via Menu:
Zones, which were violated ( , are checking by pressing the
Permission to make changes of the system (service mode entry)
aliarmas alarm
MAS- 800
apsauga arm ed
For security reasons Installer will have permission to make changes of the system setting only after
pre-alarm perspėjimas gedimas trouble
User approves it by entering his PIN .
ž F-key:
Via menu:
ž
Activated User PIN code changing
The manufacturer provides the system with 4-digit number default PIN, which are suited to system's User
count number. For example: the default PIN for the
etc. After installation it is strongly recommended to change default PIN.
MAS-800 alar m
armed
pre-alarm trouble ž F-key:
ž Via Menu:
PIN:
The example: The User of the system has a PIN
change it by pressing sequence of keys
[Repeat:]
Keypad display and keys backlight changing
User has possibility to change contrast and backlight intensity of keypad LCD display, also he can select
conditions, when keypad keys will be illuminated. Default settings - button's illuminating starts up after
MAS-800 alar m
pressing the button or when occurs entry delay or alarm trigger. For illuminating buttons all the time, it is
armed
pre-alarm trouble
necessary to perform such actions:
ž F-key:
.
CLR CLR
ž Via Menu:
[LCD
Chime mode
alarm
MAS-800
"Chime" function is used to inform User with the sound or light signal (LCD display, keypad keys) about
ar med
pre-alar m trouble
opening of entry/exit door or violation of other selected zone. From which zone "chime" will be activated you
can set by pressing the
ž Via Menu:

Setting Date and time

ž F-key:
ž Via Menu:
Temperature correction o
If the keypad shows an incorrect enviroment temperature, it is recommended to make temperature
MAS-800 alarm
ar med
pre-alarm trouble
correction, which can be done by entering value of temperature, measured with domestic thermometers.
The correction can be made Via Menu:
[Temper.correction.]
Activated Users' review
After system installation is recommended to review, how many Users can control the security system:
alarm
MAS-800
ž F-key:
armed
pr e-alarm trouble
ž Via Menu:
PIN: ?
LCD display will show User number (for example U
have mode "Enabled" can control system or it's partitions.

System compliance and warranty

The system is made in Lithuania, warranty term is 24 months. The manufacturer – company "Kodinis
Raktas" declares, that product "SECOLink" complies with essential EU directive and EU standard
EN 50131-1. See manufacturer's web site: www.kodinis.lt for complete text of declaration.
,
F 2 2 2 2 2 2 2 2 PIN:
ENT
,
ENT
Testing zone
is not violated
#)
, [Enable Service: User PIN:]
F 3 3 ENT
, [Service mode]
ENT
, [Change PIN:]
F 2 0 ENT
,
ENT
, [Repeat:] , [Changed].
ENT PIN: ENT
3762 [Changed].
ENT
, [Keypad Settings:]
F 0 ENT
1
,
ENT
& keypad ] , [Changed]
ENT
key on selected zone. The "chime" zone will be marked as
, [Options:]
ENT
–
, [Date and Time:]
F 2 1 ENT
,
ENT
,
ENT PIN:
,
F ENT
2 3 PIN:
, [setting]
ENT
.
– F22
.
ENT
[Tests] , [Burg. Zone Tes]
ENT
, [Enable Service: User PIN:]
ENT
– F20
first User
, [New PIN:]
PIN: ENT
[Options] , [Users]
ENT
1234. When he feels, that PIN isn't secure, he can
F 2 0 ENT
PIN: ENT
[Options:] ,
ENT
.
CLR CLR CLR
, , [Chime]
ENT
F21
PIN: ENT
[Options] , , [Date and Time]
ENT ENT
n keypad display
,
ENT
, (enter temperature value)
ENT
– F23
, [mode],
ENT
, [Users]
ENT
01) and mode
, .
ENT PIN: ENT
key, test finishes by pressing
, [ServicePIN:].
PIN: ENT
, [ServicePIN:].
PIN: ENT
will be 0001, for the second User - 0002 and
, [Repeat:]
PIN: ENT
, , [Change PIN:]
ENT ENT
, [Change PIN:] 1234
ENT
– F10
, [Light] , [LCD &keypad
ENT
[Keypad settings] , [PIN:]
ENT
, ,
ENT PIN: ENT
, (enter date and time)
ENT
, (enter date and time)
PIN: ENT
– F11 (only KM20T)
[Setting] ,
ENT
.
ENT
.
, [edit User.] ,
ENT ENT
: Enabled or Disabled. All Users , who
Short user manual
Testing zone
is violated
CLR
– F33
, [Changed].
PIN: ENT
, [New PIN:]
PIN: ENT
, [New PIN:] 3762 ,
ENT
] , [Changed]
ENT CLR
, [Light]
PIN: ENT ENT
.
.
ENT
.
.
ENT
[Temperature] ,
ENT
, [mode],
PIN: ENT
© 2010 "Kodinis Raktas"
,