Table of Contents
Advertisement
o When the cleaning cycle is complete, the alarm will
sound and the display will show the text on the left.
Open the oven door to silence the alarm.
o The display will then show the text on the left. After
partially extracting the tray using the arrow on the
left hand side or the two notches above the jug,
press the start button to empty the steam circuit.
The display will then show "Unloading".
o After draining is complete the display will show the
text on the left. You should then empty the water
jug.
o IMPORTANT: If, when you empty the water
jug, you notice that the water is not clear,
repeat the cleaning cycle until it is clear.
o IMPORTANT: If the electrical supply is cut during a
cleaning cycle, when the appliance is plugged back in the
oven will ask you to empty the steam circuit even if there
is not any water in it.
o IMPORTANT: Occasionally the oven will advise you to
perform a cleaning cycle. This should then be carried out
before another cooking cycle is selected.
32
Advertisement
Table of Contents
