Oven Cavity Cleaning Cycle - Baumatic BCS461SS Instruction Manual

should also ensure that the food is placed in an adequately sized
dish and use the drip trays where appropriate.
o Outer parts of the oven should only be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
o If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is
suitable for use on your appliance.
o Any damage that is caused to the appliance by a cleaning
product will not be fixed by Baumatic free of charge, even
if the appliance is within the guarantee period.

Oven cavity cleaning cycle

The purpose of this feature is to facilitate the removal of food and
grease from the oven cavity after cooking.
o Turn on the oven using the power button.
o Press the self-cleaning button to enter the cleaning
mode. The display will show 2 options of oven or steam
circuit.
option.
o Once you have done this, press the start button
cycle lasts approximately 15 minutes.
o When the cleaning cycle is complete, the alarm will
o Use the increase and decrease buttons to scroll
between the 2 options and highlight the oven
o When the oven option is highlighted press
the start button to select it. The display
may then show the text shown in the
picture on the left which indicates that you need to
insert the filled water jug into the oven.
again to being the cleaning cycle. The cleaning
sound and the display will show the text shown on
the left. Open the oven door to silence the alarm.
The oven cavity should then be wiped out with a
damp cloth.
30