Supermicro X10QBL-CT User Manual page 87

Closed Loop Thermal Throttling
Select Enabled to support Closed-Loop Thermal Throttling which will improve
reliability and reduces CPU power consumption via automatic voltage control
while the CPU are in idle states. The options are Disabled and Enabled.
Mem Hot Sense Therm Throt
Select Enabled to activate thermal-throttling when the hot-sensor reaches the
predefined threshold via automatic voltage control when the CPU is in idle states.
The options are Enabled and Disabled.
VMSE Clock Stop
Select Enabled to de-activate the clock driver for the Intel Scalable Memory
Interconnect 2 (Intel SMI 2) controller. The options are Enabled and Disabled.
Memory Topology
This item displays the status of each DIMM module as detected by the BIOS.
•
Jordon Creek Revision ID
•
Node
•
Channel
•
DIMM Frequency
Memory RAS (Reliability_Availability_Serviceability)
Configuration
memory slot specified)
Use this submenu to configure the following Memory RAS settings.
Memory RAS Configuration Setup
Current Memory Speed
This item displays the current memory speed.
Mirroring
This item indicates if memory mirroring is supported by the motherboard. Memory
mirroring creates a duplicate copy of the data stored in the memory to enhance
data security.
(Available when a DIMM module is detected in a
4-17
Chapter 4: AMI BIOS