Operation Instructions; To Change The Vacuum Bag. - CleanMax CMBP-6 Operating Instructions

OPERATION INSTRUCTIONS

Please read the following operating instructions carefully. They will help you to get
Please read the following operating instructions carefully. They will help you to get
the best performance from this professional quality vacuum cleaner and to
the best performance from this professional quality vacuum cleaner and to
maintain it in optimum condition.
maintain it in optimum condition.
Follow these simple steps for easy and effective
Follow these simple steps for easy and effective
operation of the Backpack vacuum.
operation of the backpack vacuum
Open the lid and ensure that the cloth bag is correctly located and the flexible
Open the lid and ensure that the cloth bag is correctly located and the flexible
ring provides a proper seal when the lid is closed. For optimum
ring provides a proper seal when the lid is closed. For optimum
filtration, it is advisable to use a paper vacuum bag in addition to the standard
filtration, it is advisable to use a paper vacuum bag in addition to the standard
cloth bag.
cloth bag.
If you use a paper vacuum bag, simply insert it into the cloth bag, making sure
If you use a paper vacuum bag, simply insert it into the cloth bag, making sure
that the cardboard disk is centered on the flexible sealing ring. When you replace
that the cardboard disk is centered on the flexible sealing ring. When you replace
the lid, the short nozzle in the center of the lid will be forced into the central hole
the lid, the short nozzle in the center of the lid will be forced into the central hole
of the cardboard disk of the paper vacuum bag thus providing a tight seal. Make
of the cardboard disk of the paper vacuum bag thus providing a tight seal. Make
sure the paper vacuum bag is tightly secured over the short nozzle before
sure the paper vacuum bag is tightly secured over the short nozzle before
vacuuming.
vacuuming.
Lock the lid down with the two latches. Always ensure that the vacuum bag is
Lock the lid down with the two latches. Always ensure that the vacuum bag is
empty before vacuuming. Your Backpack vacuum comes equipped with a Manual
empty before vacuuming.Your backpack vacuum comes equipped with a Manual
Reset Thermal Fuse Protector. This thermal protector is designed to protect your
Reset Thermal Fuse Protector. This thermal protector is designed to protect your
Backpack vacuum from overheating due to a cutoff in airflow (i.e. clogged hose).
backpack vacuum from overheating due to a cutoff in airflow (i.e. clogged hose).
Should this situation occur, the thermal fuse protector will safely shut off your
Should this situation occur, the thermal fuse protector will safely shut off your
Backpack vacuum to avoid any potential damage.
backpack vacuum to avoid any potential damage.
To reset the thermal fuse:
To reset the thermal fuse:
1. Unplug the vacuum cleaner. Locate and correct the problem (over filled bag,
1. Unplug the vacuum cleaner. Locate and correct the problem (over filled bag,clog
clog in hose, clogged filters, etc.).
in hose, clogged filters, etc.).
2. Locate "tripped" fuse the small red button located on the bottom of the main
2. Locate "tripped" fuse; the small red button located on the bottom of the main
body.
body.
3. Using a pencil, paper clip, or other pointy object, push the reset button.
3. Using a pencil, paper clip, or other pointy object, push the reset button.
4. Plug Backpack vacuum in and begin using.
4. Plug backpack vacuum in and begin using.
In addition, your Backpack vacuum has been fitted with a thermal overload switch
to protect the motor against damage should the airflow be blocked for extended
In addition, your backpack vacuum has been fitted with a thermal overload switch
periods. This may occur if the vacuum bag is overfull or if the vacuum hose is
to protect the motor against damage should the airflow be blocked for extended
blocked. The vacuum motor will stop before it can get too hot. If this happens,
periods. This may occur if the vacuum bag is too full or if the vacuum hose is
empty and thoroughly clean the vacuum bag or free any blockage and ensure
blocked. The vacuum motor will stop before it can get too hot. If this happens,
that adequate airflow is restored. The motor will automatically restart after it has
empty and thoroughly clean the vacuum bag or free any blockage and ensure that
cooled to a safe operating temperature.
adequate airflow is restored. The motor will automatically restart after it has cooled
to a safe operating temperature.
1. The vacuum hose is fitted into the cuff in the lid. It should not
be necessary to remove the hose in normal operation.
To vacuum with the backpack vacuum
1. The vacuum hose is fitted into the cuff in the lid. It should not be necessary to
2. Place the Backpack vacuum on your back, adjust the shoulder straps
remove the hose in normal operation.
until you feel comfortable and then tighten the waist belt. The
Backpack vacuum is designed to ride higher on your back for
2. Place the backpack vacuum on your back, adjust the shoulder straps until
maximum comfort.
you feel comfortable and then tighten the waist belt. The backpack vacuum is
designed to ride higher on your back for maximum comfort.
3. Plug the cord into a 110 volt, grounded outlet. Always unwind the cord
completely before vacuuming. It is important to maintain the power
3. Plug the cord into a 110 volt, grounded outlet. Always unwind the cord
cord in good condition. This unit ships with a 50' 16AWG x 3 conductor
completely before vacuuming. It is important to maintain the power cord in good
SJT extension cord. Always use a 16x3 SJT extension cord when
condition. This unit ships with a 50' 16AWG x 3 conductor SJT extension cord.
operating this unit. Use care when pulling the cord around sharp
Always use a 16x3 SJT extension cord when operating this unit. Use care when
edges and through doorways
pulling the cord around sharp edges and through doorways. Never operate the
Backpack vacuum if the power cord is damaged in any way.
Never operate the Backpack vacuum if the power cord is damaged in any way.
4. Attach the extension wand to the hose and fit the floor tool or any of the other
4. Attach the extension wand to the hose and fit the floor tool or
vacuum accessories on the wand. any of the other vacuuming accessories on the wand.
5. Turn the vacuum on. The toggle switch is located on the switch box. You may
5. Turn the vacuum on. The toggle switch is located on the switch box.You may clip
clip the switch box to the waist belt.
the switch box to the waist belt.

To change the vacuum bag.

Turn off main power
Turn off main power
switch and unplug unit
switch and unplug unit
from wall outlet.
from wall outlet.
Remove vacuum hose
from top of unit.
Release the two
latches and lift off lid.
Separate lid from paper
bag insert and dispose
of paper bag.
Remove cloth filter bag,
clean, dust and replace.
Insert new paper bag
making sure to align lid
nozzle with bag hole and
replace latches.