Hotpoint E4DG AA X MTZ Operating Instructions Manual page 7

Description of the appliance
Control panel
1. ON/OFF
The entire product (both the refrigerator and freezer compartments)
may be switched on by pressing this button. The red LED indicates
that the product is switched off, while the green LED shows that it
is operating.
2. REFRIGERATOR and
Used to modify the temperature setting of the refrigerator; confirmation
corresponding to the selected temperature appears on the display.
3. Refrigerator display
Shows the set temperature for the refrigerator compartment.
4. I-CARE
Controls the activation and deactivation of the I-CARE function (optimal
operating temperature for minimal energy consumption). When this
function is activated, the I-CARE LED on the keypad lights up.Press
and hold the I-CARE button for 8 seconds so that the corresponding
LED begins to flash; this will allow you to set the temperature to in
the Refrigerator compartment and in the Freezer compartment. Two
minutes after the most recent user interaction, the display enters its
energy saving mode.To exit the energy saving mode, simply press
any button or open the refrigerator door.
5. ALARM
An alarm situation has been detected in the product (see
Troubleshooting section).
6. FRUIT & VEGETABLES:
This feature allows you to change the temperature of the first
compartment of the freezer to store fruit and vegetables. When
you enable this feature, the icon on the display turns on and the
temperature reaches the ideal level to store fruit and vegetables.
Please start storing fruit and vegetables two hours after enabling
this feature.
The feature does not have any time limitation.
When the feature is enabled, you cannot store frozen food in the first
compartment. This is why we recommend to empty the drawer before
enabling this feature. Frozen food can be moved to the second drawer
of the freezer. This compartment works independently, by keeping
the freezer temperature set on the display.
During the MTZ operation with display set to
FRUIT & VEGETABLES, a high temperature of the
environment and/or a heavy use of the freezer could
take to an alarm condition. It is advisable to prevent
this problem by changing the function.
When the feature is ON, please do not store food
close to the holes of the drawer. When the feature
is ON you can change the temperature setting in
the second drawer of the freezer only on a defined
range (-18°C).
"In order to optimize the product performance,
please use the provided mat and position it so that
it covers the whole drawer area. The mat offers a
washable support in case of direct contact with
food and it generates more uniform temperatures
inside the compartment. Please remove the mat at
the bottom when the feature is set on off."
This feature can be disabled:
- By pressing one more time the feature button
- By selecting another feature MTZ
- By disabling the combined feature
.
7. FREEZER and temperature adjustment
Used to modify the temperature setting of the
freezer; confirmation corresponding to the selected
temperature appears on the display.
8. FREEZER display
Shows the set temperature for the freezer
compartment.
9. FISH & MEAT:
This feature allows you to change the temperature of
the first compartment of the freezer to store delicate
food such as meat and fish.
When you turn on the feature, the display icon turns
on and the temperature reaches the ideal setting in
order to store meat and fish.The feature does not
have any time limitation.
temperature adjustment
1
3
13
12
4
When the feature is enabled, you cannot store frozen food in the first
compartment. This is why we recommend to empty the drawer before
enabling this feature. Frozen food can be moved to the second drawer
of the freezer. This compartment works independently, by keeping
the freezer temperature set on the display. When the feature is ON
you can change the temperature setting in the second drawer of the
freezer only on a defined range (from -18°C to -21°C).
This feature can be disabled:
- By pressing one more time the feature button
- By selecting another feature MTZ
- By disabling the combined feature
10. QUICK FREEZE
This feature allows you to change the temperature of the first
compartment of the freezer to freeze food in a quicker way.
When you enable this feature, the icon on the display turns on.
You can also insert hot food in the compartment.Please start storing
food two hours after enabling this feature.
This feature automatically deactivates after 24 hours.
When the feature is enabled, you can store frozen food in the first
compartment. The second drawer of the freezer works with the same
temperature of the first compartment.
In order to maximize performance, please use the special drawer.
Only in the suitable drawer you can also insert hot food, on condition
that it is duly protected.
This feature can be disabled:
- By pressing one more time the feature button
- By selecting another feature MTZ
- By disabling the combined feature
- Automatically after 24 hours
11.SAFE DEFROST:
This feature allows you to change the temperature of the first
compartment of the freezer to defrost food.
When you set the function, the icon on the display turns on and the
temperature reaches the ideal setting in order to defrost food (about
1°C).
The feature does not have any time limitation.
When the feature is enabled, you cannot store frozen food in the first
compartment. This is why we recommend to empty the drawer before
enabling this feature. Frozen food can be moved to the second drawer
of the freezer. This compartment works independently, by keeping
the freezer temperature set on the display.
When the feature is on you can modify the temperature setting in
the second freezer drawer only in a determined range (from -18°C
to -21°C).
In order to maximize performance, please use the special drawer.
We recommend to put food to be defrosted in containers which allow
liquid collection during the defrosting process.
This feature can be disabled:
- By pressing one more time the feature button
- By selecting another feature MTZ
- By disabling the combined feature
12. HOLIDAY
Activates or deactivates the HOLIDAY function (the
HOLIDAY LED on the keypad lights up), while the
temperature values +12°C and -18°C appear on
the refrigerator and freezer displays respectively.
Two minutes after the most recent user interaction,
the display enters its energy saving mode (see
2
I-CARE function).
13. OFF:
5
This feature allows you to turn off the first freezer
compartment. When you activate this feature, the
icon on the display turns on.
When the feature is enabled, you cannot store food
in the first compartment. This is why we recommend
to empty the drawer before enabling this feature.
Frozen food can be moved to the second drawer of
the freezer. This compartment works independently,
8
by keeping the freezer temperature set on the
display.
7
In order to enable and disable this feature you must
press together and for 3 seconds the keys "QUICK
FREEZE" and "SAFE DEFROST". An acoustic signal
6 9
will confirm activation or deactivation.
This feature can be disabled by turning off the
combined feature
10 11
7