MAC Address - The remote station's MAC address. The value can not be changed.
Device Password - The security ID of remote station.
Device Name - The name used for identifying a station.
To add or modify a station entry, click the Add or Modify button in the operation column and follow
these instructions:
1.
Enter the station password in Device Password field. The format of the password is
XXXX-XXXX-XXXX-XXXX (X is any character). For example, RLXL-BYPI-MZBO-OPAB.
2.
Enter a name you want to give the station in the Device Name field or leave it empty. For example,
Station A.
3.
Click the Save button to save this entry.
To add or modify another entries, repeat steps 1-3.
Click the Delete button in the operation column to delete a station entry.
Click the Add New... button to add a station into current network. The steps are the same as adding a
station entry.
TL-WPA4220
Figure 3-19 Station Settings
Figure 3-20 Add or Modify PLC Station entry
22
300Mbps AV500 WiFi Powerline Extender