Chapter 3 Configure The Device; Login; For Wired Connection - TP-Link TL-WPA4220 User Manual

Chapter 3 Configure the Device

This Chapter describes how to configure your powerline extender via the web-based management page.
The 300Mbps AV500 WiFi Powerline Extender is easy to configure and manage with the Web-based
management page, which can be launched on any windows, Macintosh or UNIX OS with a web browser
Internet Explorer, Netscape

3.1 Login

3.1.1 For Wired Connection

If your computer is connected to the extender via Ethernet cable, you can log in the extender by
following the steps below:
1. Obtain the Management Utility setup file from the product support page at http://www.tp-link.com.
2. Open the .exe file and click Connect to log in to the Web-based management utility.

Note:
If another TL-WPA4220 is displayed on the screen above and you cannot decide which model is the
one you are configuring, please refer to the MAC address under MAC Address column. The device's
MAC address can be found on the label at the bottom of the device.
3. Enter admin for the User name and Password (both in lower case letters) in the screen below. Then
click OK or press Enter.
TL-WPA4220
® Navigator, Firefox, Safari, Opera or Chrome).
Figure 3-1 Management Utility
300Mbps AV500 WiFi Powerline Extender
8