Table of Contents
Advertisement
Making/Answering Calls
027XXXXXXX. For incoming international
calls, your display may only show "0000".
For business users on a Centrex line, your
display will show Centrex extension
numbers in the shorter extension number
format used within your company.
R The Caller ID information will not be
presented on incoming fax calls if Telecom
FaxAbility is used.
Using toll services from Telecom or
another company (for New Zealand)
Your telephone company may charge you for
a local call if the number dialled has the area
code prefix included. If this is unacceptable,
dial only the 7-digit local number. Do not dial
the "0" prefix or the area code.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Important:
R If the unit cannot receive caller information,
the following is displayed:
– "Out of Area": The caller dials from
an area which does not provide a Caller
ID service.
– "Private Caller": The caller
requests not to send caller information.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as a
missed call and
is displayed. This lets you
know if you should view the caller list to see
who called while you were away.
Even if only one missed call in the caller list is
viewed (page 37),
disappears from the
display. When you receive another new call,
is displayed again.
Note:
R Even when there are unviewed missed
calls,
disappears from the standby
display if the following operation is
performed by one of the registered
handsets:
16
– Being replaced on the charger.
– Pressing MeN.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
Call waiting and Caller ID
compatible (for Australia)
If you subscribe to Caller ID service, your
handset displays the 2nd caller's information
while talking. After you hear a call waiting
tone, the caller's phone number will be
displayed.
You can answer the 2nd call, keeping the 1st
call on hold. Follow your phone service
provider instructions using MRN. (Recall/flash
function)
R If the phone number is stored in the
phonebook with its name, the caller's name
will also be displayed.
R Please contact your phone service provider
for details and availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or muted
for a short period of time. This is not a fault
of the product as these events are normal.
R The tones are generated by your phone
service provider.
For Call Waiting or Call Waiting
Caller ID service users (for New
Zealand)
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
Advertisement
Table of Contents
