Table of Contents
Advertisement
B
586ITOX System Board User' s Manual
CPU Fan Connector
The system board is equipped with a 3-pin fan connector at
location J6 of the system board.
ATX Connector
The system board is equipped with an ATX power connector at
location J1 of the system board. Using an ATX power supply, you
can either shut down your computer by pressing the Power
button located on the front bezel of your computer or by
executing the Shut Down command under the Windows
operating system. Your system will enter the " soft power off" state.
To power on your system automatically, enable " Resume By Alarm"
in the Power Management Setup of the Award BIOS. This will allow
you to set the day and time you would like your system to wake
up.
An ATX power supply also provides adequate airflow throughout
the chassis to prevent overheating the processor.
72
Pin
Function
1
GND
2
+12V
3
NC
®
95
Advertisement
Table of Contents
