Using The Call Function - Phiaton BT 460 Owner's Manual

Hide thumbs Also See for BT 460:
Table of Contents

Advertisement

9. USING THE CALL FUNCTION

1) Accepting a Call
- When the incoming call tone is heard through the headphones, tap touch panel twice quickly or press
the POWER button. (Volume control : While on a call, use the touch panel to control volume)
2) Ending a Call
- While on a call, shortly pressing the POWER Button or tap touch panel twice quickly to end the call.
3) Rejecting a Call
- When the incoming call tone is heard through the headphones, press and holds the POWER Button for
about 1 second.
(After hearing the 'beep' signal tone, the incoming call is rejected and the voice guidance "Call
Ignored" is heard.)
4) Making a Call
- Press and hold the POWER Button for about 1 second. The 'Redialing' voice guidance is provided and
a call is connected with the most recent number.
※ This feature may slightly differ depending on your 'Bluetooth Device'
5) Call Waiting
- When there is another incoming call while on a call. (Supported only when having applied for this
service with your telecom provider.)
- Press and hold the POWER Button for about 1 second to place the current call on call waiting and
connect the second call.
(Press the POWER Button again for about 1 second to switch between the waiting call and connected call.)
- Shortly press the POWER Button to end the current call and connect the second call.
6) Switching between the Device and Mobile Phone
- To switch the call from mobile phone to the headphone, press the POWER Button for 1 second.
Incoming Bell/Outgoing Bell
During Call
When there are two calls connected
※ Battery use time
Classification
Continuous Talk Time
Continuous
Music Play Time
Stand by Time
Full Charge Time
* The above times may differ depending on the environment in which it is used.
Status
aptX High Quality
Sound Mode
AAC High Quality
Sound Mode
SBC Mode
.
LED Indicator
Purple light blinks in 1.5 second intervals
Blue light slowly blinks every 6 seconds
Purple light slowly blinks every 6 seconds
Usage time
MAX. 20 hours
MAX. 18 hours
MAX. 22 hours
MAX. 20 hours
MAX. 110 hours
About 3 hours
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents