Power Manager - NEC MultiSync E900+ User Manual

E - 2
ErgoDesign
The MultiSync ErgoDesign features enhance human ergonomics (human
and earth conditions). MultiSync monitor's ErgoDesign will improve the
working environment, protect the health of the user and save money.
ErgoDesign parallels the strict European standards of power management
and reduced emissions:
–
automatic display power-down (also known as NUTEK
specification 803299)
–
emission characteristics (stricter than those referred to as reduced
electromagnetic fields as recommended by MPR II and also by
TCO)
–
safety (EN 60950)
MultiSync monitors comply with these standards by offering IPM System
power management and Reduced Magnetic Field technology.

Power Manager

IPM (Intelligent Power Manager) System is an innovative power-saving
utility that complies with both the EPA's Energy Star requirements and
Europe's TCO NUTEK's power management requirements. Energy Star
products use less than 30 watts when in the main power saving mode. The
NUTEK specification 803299 requires automatic power down to less than 30
watts in the suspend mode and less than 8 watts in the off mode.
When in the maximum power-down mode, the MultiSync E900+ monitor
will consume less than 10% of the total power drawn under normal
operation. This innovation adds up to more than 90% energy savings,
longer monitor life, environmental protection, reduced emissions and
reduced air conditioning costs of the work environment. The IPM System
increases the monitor's life and saves energy and costs by powering down
when not in use.
MultiSync monitors follow the Video Electronics Standard Association
(VESA) approved DPMS power-down signalling method. VESA's
Display Power Management Signalling (DPMS) method, which is
endorsed by the EPA, is the power-down process a system should use to
communicate to the monitor to save power. Power-down functions can be
utilised only with an Energy Star system or video card which adheres to
the VESA DPMS standard. By using the monitor's horizontal and vertical
Introduction