Asus RS100-E5-PI2 User Manual page 120

3. When prompted, use the arrow keys to select Yes from the Consistency
Check dialog box, then press <Enter>. You may also press <F10> to check
the drive consistency.
Configure
Initialize
Objects
Rebuild
Check Consistency
A progress bar appears on screen.
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drive 0
4. While checking the disk consistency, press <Esc> to display the following
options.
• Stop: Stops the consistency check. The utility stores the percentage
of disk checked, When you restart checking, it continues from the last
percentage completed rather than from zero percent.
Continue: Continues the consistency check.
•
• Abort: Aborts the consistency check. When you restart checking, it
continues from zero percent.
5. When checking is complete, press any key to continue.
6-26
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Management Menu LD
0 10 154494MB 4 64 KB ONLINE
Virtual Drives
Virtual Drive 0
SPACE-(De)Select, F10-Check Consistency
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Management Menu LD
0 10 154494MB 4 64 KB ONLINE
VD 0 Consistency Check. Press Esc to Abort.
Virtual Drives
The Data On The Drives Is Inconsistency. Repair Done!
SPACE-(De)Select, F10-Check Consistency
Virtual Drive(s) Configured
RAID Size #Stripes
Consistency Check?
Yes
No
Select VD
Virtual Drive(s) Configured
RAID Size #Stripes
CC Under Process
¦ 85 % Completed
StripSz Status
StripSz Status
Chapter 6: RAID Configuration