FLIR HM series Operator's Manual page 25

HM-Series Operator's Manual
White/Black Hot/Marine Red Button
Use this button to toggle between the video options. In the
default White Hot mode, hotter objects appear as white or
light grey. In the Black Hot mode, hotter objects appear as
black or dark grey. The Marine Red mode is based on the White Hot
mode, but the hottest objects in the scene are red to help maintain
normal night vision.
While white hot is the most commonly used and visually intuitive
method of viewing thermal imagery, black hot can often enhance
contrast of certain objects or provide better visual perspective in
some conditions. When switching between modes, the appropriate
icon is displayed for approximately 3 seconds.
White hot
Display Brightness Button
Use this button to cycle through the five levels of display
brightness. Each press of the button advances to the next
level of brightness.
When the highest brightness level is reached, subsequent button
presses advance to the next lower brightness levels. When the lowest
brightness level is reached, subsequent button presses advance to
the next higher brightness levels. One of the following icons is
displayed for approximately 3 seconds after the button is pressed
indicating the current brightness level:
Lowest
432-0004-00-10, Revision 120
www.actoolsupply.com
3—Operating Your HM-Series Camera
Black hot Marine Red
Highest
19