Schedule Update - AerialBox T2200 User Manual

Update over USB
1. Go to dishtv.co.nz/support/
downloads to download the
corresponding firmware package.
The file package will be a ZIP file
which will need to be extracted
and moved to a USB device that
you use to plug into the T2200 unit.
2. Plug in the USB on of the T2200
ports, either at the front or the rear.
3. A message may appear on screen
asking you about a new update,
you can proceed from there or
alternatively you can access Menu
> Manual Update then select USB
as the method.
4. Wait up to 5 minutes for the
software to download.
42

Schedule Update

Let the T2200 do all the upgrading for
you. You can change how the unit
checks and installs new updates.
You can:
• Enable Auto Software Updates.
This will allow thew unit to check for
updates at a specified time.
• Turn on / off Boot OND search
which checks for updates when
you turn on the unit.
• Set the SW Search Time from 4am to
any other time.
Please do not turn off the
T2200 while the upgrade is in
progress as this will damage the
corrupt the firmware needed to
operate the unit.
!