Installation; Auto Scan - AerialBox T2200 User Manual

Installation

Auto Scan

Scan for new channels on the Freeview
broadcast by completing an Auto
Scan. Please note that an Auto Scan
will wipe all channels including booked
shows, you will need to relink shows
via the EPG after the scan. This will not
erase already recorded shows.
Press Menu > Installation then Auto
1.
Scan.
2. Confirm that you understand that
channels will be wiped.
3. Please wait a few seconds for the
unit to re-tune and scan for the
Freeview Channels, this may take
up to 2 minutes depending on how
many channels there are.
4. At any stage in the scan you can
cancel the function by pressing the
RED button.
5. Once completed, the first channel
in the channel listings will display.
Manual Scan
Scan for specific frequencies in the
broadcast such as new Multiplexes
or non-Freeview channels, please be
aware that if you rescan for pre existing
frequencies that the current channels fit
into then you will loose all bookings from
the EPG.
Press Menu > Installation then
1.
Manual Scan
2. Choose your channel number
which you want to allocate.
Sometimes an on screen
prompt will ask you to re tune
your unit, Auto Scan is the
easiest way to do this as it looks
for any changes made by
the broadcasters or network
operators.
37