Load Paper In The Paper Tray - Brother DCP-8250DN Quick Setup Manual

3
Load paper in the paper
tray
a
Pull the paper tray completely out of the
machine.
b
While pressing the green paper-guide release
lever a, slide the paper guides to fit the paper
size you are loading in the tray. Make sure that
the guides are firmly in the slots.
c
Fan the stack of paper well to avoid paper jams
and misfeeds.
d
Put the paper in the tray and make sure:
 The paper is below the maximum paper
mark (bbb) a.
Over filling the paper tray will cause paper
jams.
 The side to be printed on is face down.
 The paper guides touch the sides of the
paper so it will feed correctly.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
f
Lift up the support flap a to prevent paper from
sliding off the face-down output tray.
For more information about recommended
paper, see Recommended paper and print
media in the Basic User's Guide.
4
Attach the control panel
cover
a
Open the document cover.
b
Choose your language and attach the control
panel cover to the machine.
Note
If the control panel cover is not fitted correctly, the
key operations will not work.
3