Settings; Basic Setting Operation; General Setup (General); Sound Setup (Sound) - Sony RSX-GS9 Operating Instructions Manual

Settings

Basic Setting Operation

You can set items in the following setup categories:
General setup (General), Sound setup (Sound),
BLUETOOTH setup (BT Setting)
Setting by "SongPal" is also available (page 16).
(While the BT phone is selected, only the
BLUETOOTH setup is available.)
Use the remote commander to perform the
following.
1
Press and hold MENU, press  or  to
select the setup category, then press
ENTER.
The items that can be set differ depending on
the source and settings.
2
Press  or  to select the options, then
press ENTER.
To return to the previous display
Press .

General Setup (General)

Clock Adjust (page 9)
Dimmer
Dims the display: [ON], [OFF], [Auto].
([Auto] is available only when the illumination
control lead is connected, and turn on the head
light).
Optical Out
Selects the optical output setting: [OFF],
[48kHz], [96kHz].
(The volume control on the unit does not work
when set to [48kHz] or [96kHz].)
BTM (best tuning memory) (page 12)
(Available only when the tuner is selected.)
Regional
Restricts reception to a specific region: [ON],
[OFF]. (Available only when FM is received.)
Firmware
(Available only while the source is off and the
clock is displayed.)
Checks/updates the firmware version. For
details, visit the support site on the back cover.
Version
Displays current firmware version.
Update
Enters firmware update process: [NO], [YES].
Updating the firmware takes a few minutes to
complete. During the update, do not turn the
ignition to the OFF position.

Sound Setup (Sound)

This setup menu can also be opened by pressing
SOUND. If [Optical Out] is set to [48kHz] or [96kHz],
this setup menu is not available.
Subwoofer
(Automatically set to [OFF] when [Optical Out] is
set to [48kHz] or [96kHz].) (Not available during
native DSD playback while USB-DAC is selected.)
Sub Level (subwoofer level)
Adjusts the subwoofer volume level: [+10dB] –
[0dB] – [-10dB].
Sub Phase (subwoofer phase)
Selects the subwoofer phase: [Normal],
[Reverse].
LPF Freq (low pass filter frequency)
Selects the subwoofer cut-off frequency: [OFF],
[50Hz], [63Hz], [79Hz], [99Hz], [125Hz], [158Hz],
[198Hz], [250Hz].
LPF Slope (low pass filter slope)
Selects the LPF slope (effective only when [LPF
Freq] is set to other than [OFF]): [SLP1] (-12dB/
oct), [SLP2] (-24dB/oct), [SLP3] (-36dB/oct),
[SLP4] (-48dB/oct).
LPF Mode (low pass filter mode)
Sets the filter mode: [Mono], [Stereo].
HPF Freq (high pass filter frequency)
Selects the front/rear speaker cut-off frequency:
[OFF], [50Hz], [63Hz], [79Hz], [99Hz], [125Hz],
[158Hz], [198Hz], [250Hz].
HPF Slope (high pass filter slope)
Selects the HPF slope (effective only when [HPF
Freq] is set to other than [OFF]): [SLP1] (-12dB/
oct), [SLP2] (-24dB/oct), [SLP3] (-36dB/oct),
[SLP4] (-48dB/oct).
Sub DSD (subwoofer DSD)
(Available during native DSD playback while
USB-DAC is selected.)
LPF Freq (low pass filter frequency)
Selects the subwoofer cut-off frequency: [OFF],
[150Hz].
LPF Mode (low pass filter mode)
Sets the filter mode: [Mono], [Stereo].
Pos Custom (position custom)
Sets [Custom] of [Pos Preset].
(Available when any source except for BT phone
is selected.) (Automatically set to [OFF] when
[Optical Out] is set to [48kHz] or [96kHz].)
Front Left, Front Right, Rear Left, Rear Right,
Subwoofer
Sets the distance from your desired position to
the speaker.
Adjustable range: [0] – [350] cm (0 – 11.5 ft)
17
GB