Sony RSX-GS9 Operating Instructions Manual page 31
Hide thumbs
Also See for RSX-GS9:
- Operating instructions manual (88 pages) ,
- User manual (32 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
Available languages
Available languages
High level input connection
For details on the connection, refer to the manual
supplied with your audio device.
Left speaker
White
White
output
White/black striped
White/black striped
Right speaker
Gray
Gray
output
Gray/black striped
Gray/black striped
Audio device with
speaker outputs
Optical connection
This OPTICAL OUT is designed for connecting a
power amplifier with an optical input. When
another digital device is connected, the functions
of the device may not work properly.
When making connections, do not bend the
optical cable (not supplied). Doing so may
prevent output of sound.
When the optical connection is made:
set [Optical Out] to [48kHz] or [96kHz] to
enable.
the volume controls on the unit and the remote
commander do not work.
[Subwoofer], [Pos Custom], [Pos Preset], [EQ10
Preset], [Balance], [Fader], [Loudness] and
[DSEE HX] are automatically set to [OFF].
No sound is output while native DSD playback
is performed via the USB micro-B port.
Power amplifier connection
Stop using the unit and the power amplifier that is
not supported a High-Resolution Audio, when
unusual noise is generated.
Memory hold connection
When the yellow power supply lead is connected,
power will always be supplied to the memory
circuit even when the ignition switch is turned off.
Power connection diagram
Make sure your car’s auxiliary power connector, and
match the connections of cords correctly
depending on the car.
Auxiliary power connector
Common connection
Red
Red
Yellow
Yellow
continuous power
4
Yellow
supply
7
switched power supply
Red
When the positions of the red and yellow
leads are inverted
Red
Red
Yellow
Yellow
4
switched power supply
Yellow
continuous power
7
Red
supply
When the car without ACC position
Red
Red
Yellow
Yellow
After matching the connections and switching
power supply leads correctly, connect the unit to
the car’s power supply. If you have any questions
and problems connecting your unit that are not
covered in this manual, consult the car dealer.
Page 31
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
